// Indestructible, Even in the Heaviest Use Introducing the Rise Premium Belt. Indestructible, even in the heaviest use, this weightlifting belt ensures consistent back support and stability, so you’ll never have to worry about its reliability for securing your lifts.
// 100% Handcrafted in Limited Volume Every single Rise Premium Belt is 100% handcrafted in limited volume monthly, using only the finest cowhide leather and tanning methods available. 4" back width and 2.5” wide front support.
// Made With the Strongest Synthetic Thread in Use Today To ensure no other training belt comes close, every aspect of the Rise Premium Belt was thought of, down to the smallest details. The Rise Premium Belt is reinforced with tough nylon stitching, which is the strongest synthetic thread in use today. It has a higher strength-to-size ratio than polyester thread, which is sometimes used by other belt manufacturers. The remarkable properties of this thread make it the perfect choice for heavy duty resistance. It offers an extremely high resistance to moisture, mildew and abrasion, and resists the degrading effects of most acids, alkalis, oils and chemicals. The high tensile strength of nylon thread and its excellent lifespan are some of the major reasons the US military has used it for decades.
// Resistant to Corrosion and Stress Up to 73200ps The design of the Rise Premium Belt is murdered out with matte-black hardware made of steel, which can resist stress by tensile strength of up to 73200 psi.
// Precision-spaced holes, for optimal comfort and support To make sure you can get this belt very tight with minimal effort, the Rise Premium Lever Belt features precision-spaced holes, allowing for custom tightening and guaranteeing optimal comfort and support.
// Hydraulic Beam Pressed Logo The cherry on top of this unsurpassed belt is a Rise embossed logo, pressed down with a magnesium die plate using 60-ton hydraulic beam press, to ensure an incredibly smooth finish and unmatched style.
// Take Your Lifts to the Next Level Take your lifts to the next level with the unsurpassed support and protection offered by the Rise Premium Belt.
1- Use a damp soft or microfiber cloth to clean the leather. 2- Use a vegetable leather conditioner oil to provides shine, nourishment and water protection.
Note: Leather soap and similar cleaning products should be used sparingly and only when necessary. Do not use a heater or blow dryer to dry as this can fade or damage the leather. Keep out of direct sunlight to prevent the colour to fade away.
All Rise products carry a 30-day Limited Warranty on defective materials or faulty workmanship, from the original date of purchase. Rise does not warrant against normal wear and tear, nor damage caused by accident, misuse, abuse or neglect.
This is not your pants size. With your clothes on, measure the circumference halfway between your
rib cage and your hips (usually around the belly button). If you expect to wear a hoodie while
training, measure yourself with it. Size Guide
If you are between two sizes, size up. The measurement are inclusive ">= and <="
As a general rule, you should be able to pass tightly one hand size between your midsection and the
To the contrary of common belief, the belt shouldn't be worn on your hips close to your lower
back. The belt should be right below your rib cage and seat above your hip bone. The tighter it's
worn the more secure the Lever Buckle will stay in place.
If you can feel the belt on your
hips, the belt is too low. If the belt is on your rib cage, it's too high, it should be placed
right underneath your rib cage.
The Rise Belts are designed to increase intra-abdominal pressure when breathing. When breathing
your midsection expands and stabilizes your core by pressing against the belt.
A brand new leather belt will feel stiff in the beginning, the more you use it, the better it will feel
and mould to your body.
Usually, a few workouts do it. You might want to roll in the belt back and forth when you receive
Do not roll it too small to prevent damaging the leather or suede.
How to clean your belt (Leather and Neoprene Finish)
Use a damp soft or microfiber cloth, dip in a bowl of water with a drop or two of soap and wring
until the cloth is damp.
Wipe the leather with another damp cloth (dip in water only and wring it).
Use a dry cloth to dry the leather.
How to clean the suede of your belt:
Use a dry cloth, dip in white vinegar and gently rub onto the fabric.
Gently and thoroughly brush the area to remove any dirt or marks.
Let the suede air dry.
Note: Do not use a heater or blow dryer to dry as this can fade or damage the suede.
Keep out of direct sunlight to prevent the color of the suede to fade away.
All Rise products carry a 30-day warranty on defective materials or faulty workmanship, from the date of
This warranty does not cover damage caused by accident, misuse, abuse or neglect.
Lever Belt Extended Warranty
There's a 1-year warranty on the metal lever. If for some reason it breaks within a year, we will send you
The belt itself can last a lifetime.
As for the metal lever on Lever Belts, our athletes and most of our customers
never broke a lever, however, like anything else, it can break depending on how you take care of your
If you drop your belt on the floor often or hit the metal lever often it might eventually break.
Think of it like the breaks on a car, the sportier you're driving, the quicker you'll have to change
As Seen on Instagram
// Recently viewed products
// You may also like
Premium 7mm Old School Leather Belt - Black
(1) WAIST [IN][CM]
This is not your pants size.
With your clothes on, measure the circumference halfway between your rib cage and your hips (usually around the belly button).
If you expect to wear a hoodie while training, measure yourself with it.